Limit Switch ENM2-U1Z IW

Enclosed Plastic Body.07 Limit Switches; Snap Action; 240V; 10A

Plastic bodied limit switch; ENK-SU1Z AHS-V SW

LIMIT SWITCH; PLASTIC BODY; ENK-SU1Z IW SW

LIMIT SWITCH - ALTERNATE AVAILABLE, I88-SU1Z HW

H0.50/8 Insulated,20AWG; Ferrule, Orange

.250"  Stud Mount Tab 45 degree for #6 stud

D-Sub Crimp Contact

11 SIZE CPC STD CABLE CLAMP

Ferrule - 16AWG - Red - O/A L: 16mm-Pin L: 8mm, Pack of 500

9004410000 - WEIDMULLER - Ferrule - 16AWG - Red - O/A L: 16mm-Pin L: 8mm

Wire Ferrule - Single Wire - 22 AWG - 0.34 mm² - 8 mm - Turquoise.

Wire Ferrule - Single Wire - 22 AWG - 0.34 mm² - 8 mm - Turquoise.

.250 FEM PUSH ON, OVAL, FULLY INSULATED RED NYLON 22-18AWG

2.36mm Diameter Standard .093" Pin and Socket Plug Housings, 9 Circuits, 3 Rows

ULTRA-FAST Receptacle, .250 Series, 22-18AWG

26AWG, SKY Blue Nylon, Penhole Terminal (Nylon Insulation/Single Type)

M16 Locknut, Lt. Gray, PA

Vertical-Pin Header, Std Pkg/100

PCB Pin Header, 2 Pole, 5.00mm, STL130/02-5.0-V-BLACK, vertical Std Pk/100

20AWG, White Nylon, Penhole Terminal (Nylon Insulation/Single Type)

Separator Plate, grey, use with DIN Term Blk

CONNRCPT 2 POS W/POSITIVE LOCK

Original Series-35; Liquid Tight Cordgrips

Separator Plate, grey, use with DIN Term Blk

End Plate, grey; use with DIN Term Blk CXS2.5, CXS4, CXSG2.5, CXSG4, Pkg/50

M20 Locknut, Black, PA,

M20 Locknut, Lt. Gray, PA,

End Plate, grey, use with DIN Term Blk CTS2.5U-N, CTS4U-N, CTT2.5UK/T/J/E

PCB Header, vertical, 5.00mm, 2 Pole, 16A, 300V, closed ends, green, Std Pkg/100

250 ULTRA-FAST TAB 22-18 TPBR

Fully Nylon Insulated Butted Seam Female Disconnect, Max. Temp. -40 to 221 °F (-40 to 105 °C)

Fully Nylon Insulated Butted Seam Male Disconnect, Max. Temp. -40 to 221F

End Plate, grey; use with DIN Term Blk CX4, Pkg/50

DIN Rail Spacer Terminal, 8mm width, use on 35mm DIN Rail

AMP PLUG CONNECTOR NYLON (NATURAL) 4 CAVITY

PARTITION PLATE

End Plate, use with DIN Term Blk CTC4U,

FD1210GFI - Fully Nylon Insulated  Quick Disconnect 10-12 Ga. .250 tab x .032Female Disconnect

Actuator Lock Plate, for 30 mm push button operator

End Plate, grey, use with DIN Term Blk CY Series

Gray Plastic Hood for 15 Pin D-Sub Connectors

End Plate, grey, use with DIN Term Blk CX6 Std Pk/50

Vertical-Pin Header, Std Pkg/50

END CAP (GRAY), use with DIN Term Blk CDL4UN, Std. Pack/50

6 AWG, # 10 stud, UNINSULATED RING LUG (Eng# E-357-10)

End Plate, yellow, use with DIN Term Blk CGT4U

Jumper, Push-In, 2 pole, 5mm spacing, use with CX2.5 Series

End Plate, grey, use with DIN Term Blk CDL4UN, Std. Pack/50

Endplate CX4/3

Lock out cap

End Plate, grey; use with DIN Term Blk CXDL2.5, Pkg/50

End Plate, grey, use with DIN Term Blk CX6/3

End Plate, grey; use with DIN Term Blk CX4/4, Pkg/50

End Plate, grey, use with DIN Term Blk AS4 Series

PV Wire-to-Board Connector System, 2.54mm (0.1inch) Centerline Crimp-to-Wire Receptacle.

End Plate, grey, use with DIN Term Blk CMC1-2

End Stop 35mm DIN Rail, Steel

Gasket for 2P series PB, Rubber, 22mm ID, 25mm OD

Gasket for 3P series PB, Rubber, 22mm ID, 29mm OD