Operational Modes Available Momentary: Press pedal to start process. Remove foot and allow pedal to spring back to initial position and process to stop. Maintained: Press pedal once to start process. Press pedal again to stop process. Proportional Output: When the pedal is pressed, the output is proportional to the movement of the 10 K Ohm, 2 Watt potentiometer. Anti-Trip: The Anti-Trip lever is an additional safety feature allowing the pedal to be activated only when the lever has been pushed forward
Mechanical Features: Case Material: Aluminum die cast Protective Guard: Aluminum die cast Actuator: Foot lever Ambient Air Temperature: -22° F to 176° F Switch Action: Dependent upon switch selected Contacts: Dependent upon switch selected Mechanical Life: 10 x 106 for on/off version switch operations Switching Frequency: 50 times per minute Mounting: Free standing on rubber bumpers Terminals: 4 screw terminals per contact block (replaceable) Cable Entries: All switches supplied with 1/2” conduit adapter Weight: Approximately - F1 types 1.5 Kg. (3.3 lbs.)
Maximum Voltage: 250V AC Enduring Current: 5 Amps Inrush Current: Per IEC 947-5-1, AC 15, DC 13 Standards: According to VDE 0660, 0113 IEC 947-5-1 Protection Class: NEMA 4, according to DIN 40 050 UL/CSAApproved: 5 Amp, 250 VAC, A300
The foot switch is uniquely designed to allow inclusion of additional equipment: •Emergency Stop button
•Contactor on DIN rail as main power switch
•Customized installations (e.g. light indicators)
(
